POWER CORE NC601 wire solder is suitable for use in any commercial hand soldering application. POWER CORE NC601 wire solder is ideal for difficult to solder metals such as brass, nickel and severely oxidized copper. If the flux residue must be removed, RA2000 Saponifier is effective in a 10% solution in water or SC101 Cleaner can be used at room temperature.
RoHS COMPLIANCE SN100C NC601 wire solder meets the requirements of RoHS (Restriction of Hazardous Substances) Directive, 2002/95/EC Article 4 for the stated banned substances.
|Reference||Property||Average Value||Pass-Fail Criteria||Result|
|IPC-TM-650 method 220.127.116.11. §5.5.1||Control coupons||3.43E+09||>1E+9 O at 24,96 and 168 Hours||PASS|
POWER CORE NC601 wire solder may also be obtained in standard tin/lead or other alloys, in diameters from 0.010 to 0.125 in flux percentages from 0.5% to 3.6% on 1 lb., 5 lb. and 20 lb. spools.
|Alloy||Tin 99.3%, Copper 0.7%, Nickel|
|Appearance||Clear, colorless Flux|
|Flux Rating (J-STD004)||ROM1|
|Spread Factor||Over 85|
|Copper Plate Corrosion||Pass|
|Storage||Keep in cool dry place|
|Surface Insulation Resistance (SIR) test was carried out according to J-STD-004 and IPC-TM-650 method 18.104.22.168.|